Employers on-line (16)
Telecom Wireless News
18/08/2010 By http://www.booshnews.com/ ( Source: http://www.booshnews.com )
How to Design Ultra Low Power Zigbee RF4CE Wireless NetworksWireless Technology is evolving from communications to between people and computers to communications between machines. There is a third wave of wireless that is following the almost ubiquitous integration of cell phones and wireless Internet (Wi-Fi) into our lives.
This third wireless wave consists of wireless sense and control networks that can connect and control all kinds of equipment in our homes and businesses – from freezers to light switches, from consumer electronics (TV, DVD-player) and remote controls to sensors, for detection or protection, and to central door locking and window locking in our homes (as we are used to in our cars).
Unfortunately, using today’s wireless technologies, most of those wireless sensors and controls require the use of a significant quantity of batteries creating environmental concerns (think toxic chemicals and heavy metals) as well as a serious maintenance problem (continuously exchanging batteries). Therefore ultra low power wireless networks that require very little power are of great interest.
This includes systems that can run off of a single cell battery for the life of a device as well as wireless networks and sensors that can be powered by energy harvesting (sometimes called energy scavenging). Creating ultra low power wireless networks and systems that can run off the energy that is available in the environment instead of batteries is a very exciting emerging technology.
Last year, the ZigBee organization partnered with several of the largest consumer electronics companies in the world (Panasonic, Philips, Sony and Samsung) to form what is known as ZigBee RF4CE (Radio Frequency for Consumer Electronics). This industry partnership signals the development of an entire new generation of remote control devices – for TVs, for home and office automation, for many other types of remote control products that communicate via low power RF instead of the decades old IR (infrared). By using these new communication technologies, we soon shall be seeing a wide range of remote devices that are not only interoperable among brands and models, but require so little power that their batteries will never have be changed or recharged. It is even possible to design and build remotes that will not require any batteries at all and will get their power from energy harvesting.
Challenges of wireless sensor networks
The biggest technical challenge for developing these ultra low power sensor networks is managing the energy consumption without reducing range or functionality, like speed and standards compliance. The resulting elimination of battery replacement will then simplify maintenance and provide a higher level of ease of use and safety.
Ultra low power consumption
It is obvious that current consumption – milli-amps – and duty cycling are important in wireless sensor networks. However, minimizing current consumption is only part of the solution. There are several essential issues key to developing low power wireless sensor applications, but it all starts with the development of an ultra low power transceiver radio chips.
By using a communication controller centric chip design instead of a microcontroller centric design, along with synchronized wake-ups, it is possible to reduce overall power consumption by 65% or more.
Most transceiver solutions require that the MCU be switched on the whole time during the transmission of a package. By using GreenPeak Technology’s GP500 communication controller, the MCU is only required to process the data to be transmitted or received.
Most low power radio networks rely on a processor centric approach that requires a microcontroller to handle all the intelligence for the transceiver. This requires the microcontroller to be awake the entire time that in turn requires additional power. By using a more energy efficient communication controller approach, the transceiver can transmit and receive the data independently from the microprocessor and the microprocessor is only awakened and used when it is needed to further process the data.
By using a hardware based scheduler and synchronizer within the chip itself, the radio only wakes up as needed to see if there is any data that needs to be sent. If not, it returns to sleep. If there is data to be sent, the controller then wakes up the microcontroller. The chip then communicates the information and then goes back to sleep until the next time it is scheduled to wake. 9999 times out of 10,000 – there is no message to be sent and the controller does not need to energize the microprocessor. Every time that data is sent, the chips also transmit a synchronization message to ensure that they all wake up together on the next duty cycle.
By letting the communications controller decide when to wake up and check for messages, it is possible to greatly reduce overall energy consumption. Because of the scheduler and synchronizer inside the communication controller, the system only wakes up for a brief moment to check to see if there are any messages and goes back to sleep. By letting the microprocessor sleep until it is needed, it is possible to save over 65% of energy usage as compared to a the typical always on traditional transceiver
If you multiply this individual node power saving by a wireless network of over 100 nodes, it is obvious that the entire network will be able to operate using vastly less power than a traditional microprocessor based network.
<< back to ZigBee/UWB/NFC category
Discuss Telecom wireless news in ZigBee/UWB/NFC category How to Design Ultra Low Power Zigbee RF4CE Wireless Networks on 3G Wireless Jobs Forums
Telecom Wireless News